(8)
reads configuration data from
/etc/ssh/sshd_config
(or the file specified with
-
on the command line).
The file contains keyword-argument pairs, one per line.
Lines starting with
`#'
and empty lines are interpreted as comments.
Arguments may optionally be enclosed in double quotes
()
in order to represent arguments containing spaces.
The possible
keywords and their meanings are as follows (note that
keywords are case-insensitive and arguments are case-sensitive):
- AcceptEnv
-
Specifies what environment variables sent by the client will be copied into
the session's
environ(7).
See
SendEnv
in
ssh_config5
for how to configure the client.
Note that environment passing is only supported for protocol 2.
Variables are specified by name, which may contain the wildcard characters
`*'
and
`?'
Multiple environment variables may be separated by whitespace or spread
across multiple
AcceptEnv
directives.
Be warned that some environment variables could be used to bypass restricted
user environments.
For this reason, care should be taken in the use of this directive.
The default is not to accept any environment variables.
- AddressFamily
-
Specifies which address family should be used by
sshd(8).
Valid arguments are
``any''
``inet''
(use IPv4 only), or
``inet6''
(use IPv6 only).
The default is
``any''
- AllowAgentForwarding
-
Specifies whether
ssh-agent1
forwarding is permitted.
The default is
``yes''
Note that disabling agent forwarding does not improve security
unless users are also denied shell access, as they can always install
their own forwarders.
- AllowGroups
-
This keyword can be followed by a list of group name patterns, separated
by spaces.
If specified, login is allowed only for users whose primary
group or supplementary group list matches one of the patterns.
Only group names are valid; a numerical group ID is not recognized.
By default, login is allowed for all groups.
The allow/deny directives are processed in the following order:
DenyUsers
AllowUsers
DenyGroups
and finally
AllowGroups
See PATTERNS in
ssh_config5
for more information on patterns.
- AllowTcpForwarding
-
Specifies whether TCP forwarding is permitted.
The available options are
``yes''
or
``all''
to allow TCP forwarding,
``no''
to prevent all TCP forwarding,
``local''
to allow local (from the perspective of
ssh(1))
forwarding only or
``remote''
to allow remote forwarding only.
The default is
``yes''
Note that disabling TCP forwarding does not improve security unless
users are also denied shell access, as they can always install their
own forwarders.
- AllowStreamLocalForwarding
-
Specifies whether StreamLocal (Unix-domain socket) forwarding is permitted.
The available options are
``yes''
or
``all''
to allow StreamLocal forwarding,
``no''
to prevent all StreamLocal forwarding,
``local''
to allow local (from the perspective of
ssh(1))
forwarding only or
``remote''
to allow remote forwarding only.
The default is
``yes''
Note that disabling StreamLocal forwarding does not improve security unless
users are also denied shell access, as they can always install their
own forwarders.
- AllowUsers
-
This keyword can be followed by a list of user name patterns, separated
by spaces.
If specified, login is allowed only for user names that
match one of the patterns.
Only user names are valid; a numerical user ID is not recognized.
By default, login is allowed for all users.
If the pattern takes the form USER@HOST then USER and HOST
are separately checked, restricting logins to particular
users from particular hosts.
The allow/deny directives are processed in the following order:
DenyUsers
AllowUsers
DenyGroups
and finally
AllowGroups
See PATTERNS in
ssh_config5
for more information on patterns.
- AuthenticationMethods
-
Specifies the authentication methods that must be successfully completed
for a user to be granted access.
This option must be followed by one or more comma-separated lists of
authentication method names.
Successful authentication requires completion of every method in at least
one of these lists.
For example, an argument of
``publickey,password publickey,keyboard-interactive''
would require the user to complete public key authentication, followed by
either password or keyboard interactive authentication.
Only methods that are next in one or more lists are offered at each stage,
so for this example, it would not be possible to attempt password or
keyboard-interactive authentication before public key.
For keyboard interactive authentication it is also possible to
restrict authentication to a specific device by appending a
colon followed by the device identifier
``bsdauth''
``pam''
or
``skey''
depending on the server configuration.
For example,
``keyboard-interactive:bsdauth''
would restrict keyboard interactive authentication to the
``bsdauth''
device.
This option is only available for SSH protocol 2 and will yield a fatal
error if enabled if protocol 1 is also enabled.
Note that each authentication method listed should also be explicitly enabled
in the configuration.
The default is not to require multiple authentication; successful completion
of a single authentication method is sufficient.
- AuthorizedKeysCommand
-
Specifies a program to be used to look up the user's public keys.
The program must be owned by root and not writable by group or others.
It will be invoked with a single argument of the username
being authenticated, and should produce on standard output zero or
more lines of authorized_keys output (see AUTHORIZED_KEYS in
sshd(8)).
If a key supplied by AuthorizedKeysCommand does not successfully authenticate
and authorize the user then public key authentication continues using the usual
AuthorizedKeysFile
files.
By default, no AuthorizedKeysCommand is run.
- AuthorizedKeysCommandUser
-
Specifies the user under whose account the AuthorizedKeysCommand is run.
It is recommended to use a dedicated user that has no other role on the host
than running authorized keys commands.
- AuthorizedKeysFile
-
Specifies the file that contains the public keys that can be used
for user authentication.
The format is described in the
AUTHORIZED_KEYS FILE FORMAT
section of
sshd(8).
AuthorizedKeysFile
may contain tokens of the form %T which are substituted during connection
setup.
The following tokens are defined: %% is replaced by a literal '%',
%h is replaced by the home directory of the user being authenticated, and
%u is replaced by the username of that user.
After expansion,
AuthorizedKeysFile
is taken to be an absolute path or one relative to the user's home
directory.
Multiple files may be listed, separated by whitespace.
The default is
``.ssh/authorized_keys .ssh/authorized_keys2''
- AuthorizedPrincipalsFile
-
Specifies a file that lists principal names that are accepted for
certificate authentication.
When using certificates signed by a key listed in
TrustedUserCAKeys
this file lists names, one of which must appear in the certificate for it
to be accepted for authentication.
Names are listed one per line preceded by key options (as described
in AUTHORIZED_KEYS FILE FORMAT in
sshd(8)).
Empty lines and comments starting with
`#'
are ignored.
AuthorizedPrincipalsFile
may contain tokens of the form %T which are substituted during connection
setup.
The following tokens are defined: %% is replaced by a literal '%',
%h is replaced by the home directory of the user being authenticated, and
%u is replaced by the username of that user.
After expansion,
AuthorizedPrincipalsFile
is taken to be an absolute path or one relative to the user's home
directory.
The default is
``none''
i.e. not to use a principals file - in this case, the username
of the user must appear in a certificate's principals list for it to be
accepted.
Note that
AuthorizedPrincipalsFile
is only used when authentication proceeds using a CA listed in
TrustedUserCAKeys
and is not consulted for certification authorities trusted via
~/.ssh/authorized_keys
though the
principals=
key option offers a similar facility (see
sshd(8)
for details).
- Banner
-
The contents of the specified file are sent to the remote user before
authentication is allowed.
If the argument is
``none''
then no banner is displayed.
This option is only available for protocol version 2.
By default, no banner is displayed.
- ChallengeResponseAuthentication
-
Specifies whether challenge-response authentication is allowed (e.g. via
PAM).
The default is
``yes''
- ChrootDirectory
-
Specifies the pathname of a directory to
chroot(2)
to after authentication.
All components of the pathname must be root-owned directories that are
not writable by any other user or group.
After the chroot,
sshd(8)
changes the working directory to the user's home directory.
The pathname may contain the following tokens that are expanded at runtime once
the connecting user has been authenticated: %% is replaced by a literal '%',
%h is replaced by the home directory of the user being authenticated, and
%u is replaced by the username of that user.
The
ChrootDirectory
must contain the necessary files and directories to support the
user's session.
For an interactive session this requires at least a shell, typically
sh(1),
and basic
/dev
nodes such as
null(4),
zero(4),
stdin(4),
stdout(4),
stderr(4),
arandom(4)
and
tty(4)
devices.
For file transfer sessions using
``sftp''
no additional configuration of the environment is necessary if the
in-process sftp server is used,
though sessions which use logging may require
/dev/log
inside the chroot directory on some operating systems (see
sftp-server8
for details).
The default is not to
chroot(2).
- Ciphers
-
Specifies the ciphers allowed for protocol version 2.
Multiple ciphers must be comma-separated.
The supported ciphers are:
- 3des-cbc
-
- aes128-cbc
-
- aes192-cbc
-
- aes256-cbc
-
- aes128-ctr
-
- aes192-ctr
-
- aes256-ctr
-
- aes128-gcm@openssh.com
-
- aes256-gcm@openssh.com
-
- arcfour
-
- arcfour128
-
- arcfour256
-
- blowfish-cbc
-
- cast128-cbc
-
- chacha20-poly1305@openssh.com
-
The default is:
aes128-ctr,aes192-ctr,aes256-ctr,
aes128-gcm@openssh.com,aes256-gcm@openssh.com,
chacha20-poly1305@openssh.com
The list of available ciphers may also be obtained using the
-Q
option of
ssh(1).
- ClientAliveCountMax
-
Sets the number of client alive messages (see below) which may be
sent without
sshd(8)
receiving any messages back from the client.
If this threshold is reached while client alive messages are being sent,
sshd will disconnect the client, terminating the session.
It is important to note that the use of client alive messages is very
different from
TCPKeepAlive
(below).
The client alive messages are sent through the encrypted channel
and therefore will not be spoofable.
The TCP keepalive option enabled by
TCPKeepAlive
is spoofable.
The client alive mechanism is valuable when the client or
server depend on knowing when a connection has become inactive.
The default value is 3.
If
ClientAliveInterval
(see below) is set to 15, and
ClientAliveCountMax
is left at the default, unresponsive SSH clients
will be disconnected after approximately 45 seconds.
This option applies to protocol version 2 only.
- ClientAliveInterval
-
Sets a timeout interval in seconds after which if no data has been received
from the client,
sshd(8)
will send a message through the encrypted
channel to request a response from the client.
The default
is 0, indicating that these messages will not be sent to the client.
This option applies to protocol version 2 only.
- Compression
-
Specifies whether compression is allowed, or delayed until
the user has authenticated successfully.
The argument must be
``yes''
``delayed''
or
``no''
The default is
``delayed''
- DebianBanner
-
Specifies whether the distribution-specified extra version suffix is
included during initial protocol handshake.
The default is
``yes''
- DenyGroups
-
This keyword can be followed by a list of group name patterns, separated
by spaces.
Login is disallowed for users whose primary group or supplementary
group list matches one of the patterns.
Only group names are valid; a numerical group ID is not recognized.
By default, login is allowed for all groups.
The allow/deny directives are processed in the following order:
DenyUsers
AllowUsers
DenyGroups
and finally
AllowGroups
See PATTERNS in
ssh_config5
for more information on patterns.
- DenyUsers
-
This keyword can be followed by a list of user name patterns, separated
by spaces.
Login is disallowed for user names that match one of the patterns.
Only user names are valid; a numerical user ID is not recognized.
By default, login is allowed for all users.
If the pattern takes the form USER@HOST then USER and HOST
are separately checked, restricting logins to particular
users from particular hosts.
The allow/deny directives are processed in the following order:
DenyUsers
AllowUsers
DenyGroups
and finally
AllowGroups
See PATTERNS in
ssh_config5
for more information on patterns.
- ForceCommand
-
Forces the execution of the command specified by
ForceCommand
ignoring any command supplied by the client and
~/.ssh/rc
if present.
The command is invoked by using the user's login shell with the -c option.
This applies to shell, command, or subsystem execution.
It is most useful inside a
Match
block.
The command originally supplied by the client is available in the
SSH_ORIGINAL_COMMAND
environment variable.
Specifying a command of
``internal-sftp''
will force the use of an in-process sftp server that requires no support
files when used with
ChrootDirectory
- GatewayPorts
-
Specifies whether remote hosts are allowed to connect to ports
forwarded for the client.
By default,
sshd(8)
binds remote port forwardings to the loopback address.
This prevents other remote hosts from connecting to forwarded ports.
GatewayPorts
can be used to specify that sshd
should allow remote port forwardings to bind to non-loopback addresses, thus
allowing other hosts to connect.
The argument may be
``no''
to force remote port forwardings to be available to the local host only,
``yes''
to force remote port forwardings to bind to the wildcard address, or
``clientspecified''
to allow the client to select the address to which the forwarding is bound.
The default is
``no''
- GSSAPIAuthentication
-
Specifies whether user authentication based on GSSAPI is allowed.
The default is
``no''
Note that this option applies to protocol version 2 only.
- GSSAPIKeyExchange
-
Specifies whether key exchange based on GSSAPI is allowed. GSSAPI key exchange
doesn't rely on ssh keys to verify host identity.
The default is
``no''
Note that this option applies to protocol version 2 only.
- GSSAPICleanupCredentials
-
Specifies whether to automatically destroy the user's credentials cache
on logout.
The default is
``yes''
Note that this option applies to protocol version 2 only.
- GSSAPIStrictAcceptorCheck
-
Determines whether to be strict about the identity of the GSSAPI acceptor
a client authenticates against. If
``yes''
then the client must authenticate against the
host
service on the current hostname. If
``no''
then the client may authenticate against any service key stored in the
machine's default store. This facility is provided to assist with operation
on multi homed machines.
The default is
``yes''
Note that this option applies only to protocol version 2 GSSAPI connections,
and setting it to
``no''
may only work with recent Kerberos GSSAPI libraries.
- GSSAPIStoreCredentialsOnRekey
-
Controls whether the user's GSSAPI credentials should be updated following a
successful connection rekeying. This option can be used to accepted renewed
or updated credentials from a compatible client. The default is
``no''
- HostbasedAuthentication
-
Specifies whether rhosts or /etc/hosts.equiv authentication together
with successful public key client host authentication is allowed
(host-based authentication).
This option is similar to
RhostsRSAAuthentication
and applies to protocol version 2 only.
The default is
``no''
- HostbasedUsesNameFromPacketOnly
-
Specifies whether or not the server will attempt to perform a reverse
name lookup when matching the name in the
~/.shosts
~/.rhosts
and
/etc/hosts.equiv
files during
HostbasedAuthentication
A setting of
``yes''
means that
sshd(8)
uses the name supplied by the client rather than
attempting to resolve the name from the TCP connection itself.
The default is
``no''
- HostCertificate
-
Specifies a file containing a public host certificate.
The certificate's public key must match a private host key already specified
by
HostKey
The default behaviour of
sshd(8)
is not to load any certificates.
- HostKey
-
Specifies a file containing a private host key
used by SSH.
The default is
/etc/ssh/ssh_host_key
for protocol version 1, and
/etc/ssh/ssh_host_dsa_key
/etc/ssh/ssh_host_ecdsa_key
/etc/ssh/ssh_host_ed25519_key
and
/etc/ssh/ssh_host_rsa_key
for protocol version 2.
Note that
sshd(8)
will refuse to use a file if it is group/world-accessible.
It is possible to have multiple host key files.
``rsa1''
keys are used for version 1 and
``dsa''
``ecdsa''
``ed25519''
or
``rsa''
are used for version 2 of the SSH protocol.
It is also possible to specify public host key files instead.
In this case operations on the private key will be delegated
to an
ssh-agent1.
- HostKeyAgent
-
Identifies the UNIX-domain socket used to communicate
with an agent that has access to the private host keys.
If
``SSH_AUTH_SOCK''
is specified, the location of the socket will be read from the
SSH_AUTH_SOCK
environment variable.
- IgnoreRhosts
-
Specifies that
.rhosts
and
.shosts
files will not be used in
RhostsRSAAuthentication
or
HostbasedAuthentication
/etc/hosts.equiv
and
/etc/ssh/shosts.equiv
are still used.
The default is
``yes''
- IgnoreUserKnownHosts
-
Specifies whether
sshd(8)
should ignore the user's
~/.ssh/known_hosts
during
RhostsRSAAuthentication
or
HostbasedAuthentication
The default is
``no''
- IPQoS
-
Specifies the IPv4 type-of-service or DSCP class for the connection.
Accepted values are
``af11''
``af12''
``af13''
``af21''
``af22''
``af23''
``af31''
``af32''
``af33''
``af41''
``af42''
``af43''
``cs0''
``cs1''
``cs2''
``cs3''
``cs4''
``cs5''
``cs6''
``cs7''
``ef''
``lowdelay''
``throughput''
``reliability''
or a numeric value.
This option may take one or two arguments, separated by whitespace.
If one argument is specified, it is used as the packet class unconditionally.
If two values are specified, the first is automatically selected for
interactive sessions and the second for non-interactive sessions.
The default is
``lowdelay''
for interactive sessions and
``throughput''
for non-interactive sessions.
- KbdInteractiveAuthentication
-
Specifies whether to allow keyboard-interactive authentication.
The argument to this keyword must be
``yes''
or
``no''
The default is to use whatever value
ChallengeResponseAuthentication
is set to
(by default
``yes )''
- KerberosAuthentication
-
Specifies whether the password provided by the user for
PasswordAuthentication
will be validated through the Kerberos KDC.
To use this option, the server needs a
Kerberos servtab which allows the verification of the KDC's identity.
The default is
``no''
- KerberosGetAFSToken
-
If AFS is active and the user has a Kerberos 5 TGT, attempt to acquire
an AFS token before accessing the user's home directory.
The default is
``no''
- KerberosOrLocalPasswd
-
If password authentication through Kerberos fails then
the password will be validated via any additional local mechanism
such as
/etc/passwd
The default is
``yes''
- KerberosTicketCleanup
-
Specifies whether to automatically destroy the user's ticket cache
file on logout.
The default is
``yes''
- KexAlgorithms
-
Specifies the available KEX (Key Exchange) algorithms.
Multiple algorithms must be comma-separated.
The supported algorithms are:
- curve25519-sha256@libssh.org
-
- diffie-hellman-group1-sha1
-
- diffie-hellman-group14-sha1
-
- diffie-hellman-group-exchange-sha1
-
- diffie-hellman-group-exchange-sha256
-
- ecdh-sha2-nistp256
-
- ecdh-sha2-nistp384
-
- ecdh-sha2-nistp521
-
The default is:
curve25519-sha256@libssh.org,
ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
diffie-hellman-group-exchange-sha256,
diffie-hellman-group14-sha1
- KeyRegenerationInterval
-
In protocol version 1, the ephemeral server key is automatically regenerated
after this many seconds (if it has been used).
The purpose of regeneration is to prevent
decrypting captured sessions by later breaking into the machine and
stealing the keys.
The key is never stored anywhere.
If the value is 0, the key is never regenerated.
The default is 3600 (seconds).
- ListenAddress
-
Specifies the local addresses
sshd(8)
should listen on.
The following forms may be used:
- ListenAddress
-
host | IPv4_addr | IPv6_addr
- ListenAddress
-
host | IPv4_addr : port
- ListenAddress
-
[host | IPv6_addr : port
]
If
port
is not specified,
sshd will listen on the address and all prior
Port
options specified.
The default is to listen on all local addresses.
Multiple
ListenAddress
options are permitted.
Additionally, any
Port
options must precede this option for non-port qualified addresses.
- LoginGraceTime
-
The server disconnects after this time if the user has not
successfully logged in.
If the value is 0, there is no time limit.
The default is 120 seconds.
- LogLevel
-
Gives the verbosity level that is used when logging messages from
sshd(8).
The possible values are:
QUIET, FATAL, ERROR, INFO, VERBOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3.
The default is INFO.
DEBUG and DEBUG1 are equivalent.
DEBUG2 and DEBUG3 each specify higher levels of debugging output.
Logging with a DEBUG level violates the privacy of users and is not recommended.
- MACs Specifies the available MAC (message authentication code) algorithms.
-
The MAC algorithm is used in protocol version 2
for data integrity protection.
Multiple algorithms must be comma-separated.
The algorithms that contain
``-etm''
calculate the MAC after encryption (encrypt-then-mac).
These are considered safer and their use recommended.
The supported MACs are:
- hmac-md5
-
- hmac-md5-96
-
- hmac-ripemd160
-
- hmac-sha1
-
- hmac-sha1-96
-
- hmac-sha2-256
-
- hmac-sha2-512
-
- umac-64@openssh.com
-
- umac-128@openssh.com
-
- hmac-md5-etm@openssh.com
-
- hmac-md5-96-etm@openssh.com
-
- hmac-ripemd160-etm@openssh.com
-
- hmac-sha1-etm@openssh.com
-
- hmac-sha1-96-etm@openssh.com
-
- hmac-sha2-256-etm@openssh.com
-
- hmac-sha2-512-etm@openssh.com
-
- umac-64-etm@openssh.com
-
- umac-128-etm@openssh.com
-
The default is:
umac-64-etm@openssh.com,umac-128-etm@openssh.com,
hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,
umac-64@openssh.com,umac-128@openssh.com,
hmac-sha2-256,hmac-sha2-512
- Match
-
Introduces a conditional block.
If all of the criteria on the
Match
line are satisfied, the keywords on the following lines override those
set in the global section of the config file, until either another
Match
line or the end of the file.
If a keyword appears in multiple
Match
blocks that are satisified, only the first instance of the keyword is
applied.
The arguments to
Match
are one or more criteria-pattern pairs or the single token
All
which matches all criteria.
The available criteria are
User
Group
Host
LocalAddress
LocalPort
and
Address
The match patterns may consist of single entries or comma-separated
lists and may use the wildcard and negation operators described in the
PATTERNS section of
ssh_config5.
The patterns in an
Address
criteria may additionally contain addresses to match in CIDR
address/masklen format, e.g.
``192.0.2.0/24''
or
``3ffe:ffff::/32''
Note that the mask length provided must be consistent with the address -
it is an error to specify a mask length that is too long for the address
or one with bits set in this host portion of the address.
For example,
``192.0.2.0/33''
and
``192.0.2.0/8''
respectively.
Only a subset of keywords may be used on the lines following a
Match
keyword.
Available keywords are
AcceptEnv
AllowAgentForwarding
AllowGroups
AllowTcpForwarding
AllowUsers
AuthenticationMethods
AuthorizedKeysCommand
AuthorizedKeysCommandUser
AuthorizedKeysFile
AuthorizedPrincipalsFile
Banner
ChrootDirectory
DenyGroups
DenyUsers
ForceCommand
GatewayPorts
GSSAPIAuthentication
HostbasedAuthentication
HostbasedUsesNameFromPacketOnly
KbdInteractiveAuthentication
KerberosAuthentication
MaxAuthTries
MaxSessions
PasswordAuthentication
PermitEmptyPasswords
PermitOpen
PermitRootLogin
PermitTTY
PermitTunnel
PermitUserRC
PubkeyAuthentication
RekeyLimit
RhostsRSAAuthentication
RSAAuthentication
X11DisplayOffset
X11Forwarding
and
X11UseLocalHost
- MaxAuthTries
-
Specifies the maximum number of authentication attempts permitted per
connection.
Once the number of failures reaches half this value,
additional failures are logged.
The default is 6.
- MaxSessions
-
Specifies the maximum number of open sessions permitted per network connection.
The default is 10.
- MaxStartups
-
Specifies the maximum number of concurrent unauthenticated connections to the
SSH daemon.
Additional connections will be dropped until authentication succeeds or the
LoginGraceTime
expires for a connection.
The default is 10:30:100.
Alternatively, random early drop can be enabled by specifying
the three colon separated values
``start:rate:full''
(e.g. "10:30:60").
sshd(8)
will refuse connection attempts with a probability of
``rate/100''
(30%)
if there are currently
``start''
(10)
unauthenticated connections.
The probability increases linearly and all connection attempts
are refused if the number of unauthenticated connections reaches
``full''
(60).
- PasswordAuthentication
-
Specifies whether password authentication is allowed.
The default is
``yes''
- PermitEmptyPasswords
-
When password authentication is allowed, it specifies whether the
server allows login to accounts with empty password strings.
The default is
``no''
- PermitOpen
-
Specifies the destinations to which TCP port forwarding is permitted.
The forwarding specification must be one of the following forms:
- PermitOpen
-
host : port
- PermitOpen
-
IPv4_addr : port
- PermitOpen
-
[ IPv6_addr ] : port
Multiple forwards may be specified by separating them with whitespace.
An argument of
``any''
can be used to remove all restrictions and permit any forwarding requests.
An argument of
``none''
can be used to prohibit all forwarding requests.
By default all port forwarding requests are permitted.
- PermitRootLogin
-
Specifies whether root can log in using
ssh(1).
The argument must be
``yes''
``without-password''
``forced-commands-only''
or
``no''
The default is
``yes''
If this option is set to
``without-password''
password authentication is disabled for root.
If this option is set to
``forced-commands-only''
root login with public key authentication will be allowed,
but only if the
command
option has been specified
(which may be useful for taking remote backups even if root login is
normally not allowed).
All other authentication methods are disabled for root.
If this option is set to
``no''
root is not allowed to log in.
- PermitTunnel
-
Specifies whether
tun(4)
device forwarding is allowed.
The argument must be
``yes''
``point-to-point''
(layer 3),
``ethernet''
(layer 2), or
``no''
Specifying
``yes''
permits both
``point-to-point''
and
``ethernet''
The default is
``no''
- PermitTTY
-
Specifies whether
pty(4)
allocation is permitted.
The default is
``yes''
- PermitUserEnvironment
-
Specifies whether
~/.ssh/environment
and
environment=
options in
~/.ssh/authorized_keys
are processed by
sshd(8).
The default is
``no''
Enabling environment processing may enable users to bypass access
restrictions in some configurations using mechanisms such as
LD_PRELOAD
- PermitUserRC
-
Specifies whether any
~/.ssh/rc
file is executed.
The default is
``yes''
- PidFile
-
Specifies the file that contains the process ID of the
SSH daemon.
The default is
/var/run/sshd.pid
- Port
-
Specifies the port number that
sshd(8)
listens on.
The default is 22.
Multiple options of this type are permitted.
See also
ListenAddress
- PrintLastLog
-
Specifies whether
sshd(8)
should print the date and time of the last user login when a user logs
in interactively.
The default is
``yes''
- PrintMotd
-
Specifies whether
sshd(8)
should print
/etc/motd
when a user logs in interactively.
(On some systems it is also printed by the shell,
/etc/profile
or equivalent.)
The default is
``yes''
- Protocol
-
Specifies the protocol versions
sshd(8)
supports.
The possible values are
`1'
and
`2'
Multiple versions must be comma-separated.
The default is
`2'
Note that the order of the protocol list does not indicate preference,
because the client selects among multiple protocol versions offered
by the server.
Specifying
``2,1''
is identical to
``1,2''
- PubkeyAuthentication
-
Specifies whether public key authentication is allowed.
The default is
``yes''
Note that this option applies to protocol version 2 only.
- RekeyLimit
-
Specifies the maximum amount of data that may be transmitted before the
session key is renegotiated, optionally followed a maximum amount of
time that may pass before the session key is renegotiated.
The first argument is specified in bytes and may have a suffix of
`K'
`M'
or
`G'
to indicate Kilobytes, Megabytes, or Gigabytes, respectively.
The default is between
`1G'
and
`4G'
depending on the cipher.
The optional second value is specified in seconds and may use any of the
units documented in the
Sx TIME FORMATS
section.
The default value for
RekeyLimit
is
``default none''
which means that rekeying is performed after the cipher's default amount
of data has been sent or received and no time based rekeying is done.
This option applies to protocol version 2 only.
- RevokedKeys
-
Specifies revoked public keys.
Keys listed in this file will be refused for public key authentication.
Note that if this file is not readable, then public key authentication will
be refused for all users.
Keys may be specified as a text file, listing one public key per line, or as
an OpenSSH Key Revocation List (KRL) as generated by
ssh-keygen1.
For more information on KRLs, see the KEY REVOCATION LISTS section in
ssh-keygen1.
- RhostsRSAAuthentication
-
Specifies whether rhosts or /etc/hosts.equiv authentication together
with successful RSA host authentication is allowed.
The default is
``no''
This option applies to protocol version 1 only.
- RSAAuthentication
-
Specifies whether pure RSA authentication is allowed.
The default is
``yes''
This option applies to protocol version 1 only.
- ServerKeyBits
-
Defines the number of bits in the ephemeral protocol version 1 server key.
The minimum value is 512, and the default is 1024.
- StreamLocalBindMask
-
Sets the octal file creation mode mask
(umask)
used when creating a Unix-domain socket file for local or remote
port forwarding.
This option is only used for port forwarding to a Unix-domain socket file.
The default value is 0177, which creates a Unix-domain socket file that is
readable and writable only by the owner.
Note that not all operating systems honor the file mode on Unix-domain
socket files.
- StreamLocalBindUnlink
-
Specifies whether to remove an existing Unix-domain socket file for local
or remote port forwarding before creating a new one.
If the socket file already exists and
StreamLocalBindUnlink
is not enabled,
sshd
will be unable to forward the port to the Unix-domain socket file.
This option is only used for port forwarding to a Unix-domain socket file.
The argument must be
``yes''
or
``no''
The default is
``no''
- StrictModes
-
Specifies whether
sshd(8)
should check file modes and ownership of the
user's files and home directory before accepting login.
This is normally desirable because novices sometimes accidentally leave their
directory or files world-writable.
The default is
``yes''
Note that this does not apply to
ChrootDirectory
whose permissions and ownership are checked unconditionally.
- Subsystem
-
Configures an external subsystem (e.g. file transfer daemon).
Arguments should be a subsystem name and a command (with optional arguments)
to execute upon subsystem request.
The command
sftp-server8
implements the
``sftp''
file transfer subsystem.
Alternately the name
``internal-sftp''
implements an in-process
``sftp''
server.
This may simplify configurations using
ChrootDirectory
to force a different filesystem root on clients.
By default no subsystems are defined.
Note that this option applies to protocol version 2 only.
- SyslogFacility
-
Gives the facility code that is used when logging messages from
sshd(8).
The possible values are: DAEMON, USER, AUTH, LOCAL0, LOCAL1, LOCAL2,
LOCAL3, LOCAL4, LOCAL5, LOCAL6, LOCAL7.
The default is AUTH.
- TCPKeepAlive
-
Specifies whether the system should send TCP keepalive messages to the
other side.
If they are sent, death of the connection or crash of one
of the machines will be properly noticed.
However, this means that
connections will die if the route is down temporarily, and some people
find it annoying.
On the other hand, if TCP keepalives are not sent,
sessions may hang indefinitely on the server, leaving
``ghost''
users and consuming server resources.
The default is
``yes''
(to send TCP keepalive messages), and the server will notice
if the network goes down or the client host crashes.
This avoids infinitely hanging sessions.
To disable TCP keepalive messages, the value should be set to
``no''
This option was formerly called
KeepAlive
- TrustedUserCAKeys
-
Specifies a file containing public keys of certificate authorities that are
trusted to sign user certificates for authentication.
Keys are listed one per line; empty lines and comments starting with
`#'
are allowed.
If a certificate is presented for authentication and has its signing CA key
listed in this file, then it may be used for authentication for any user
listed in the certificate's principals list.
Note that certificates that lack a list of principals will not be permitted
for authentication using
TrustedUserCAKeys
For more details on certificates, see the CERTIFICATES section in
ssh-keygen1.
- UseDNS
-
Specifies whether
sshd(8)
should look up the remote host name and check that
the resolved host name for the remote IP address maps back to the
very same IP address.
The default is
``yes''
- UseLogin
-
Specifies whether
login(1)
is used for interactive login sessions.
The default is
``no''
Note that
login(1)
is never used for remote command execution.
Note also, that if this is enabled,
X11Forwarding
will be disabled because
login(1)
does not know how to handle
xauth(1)
cookies.
If
UsePrivilegeSeparation
is specified, it will be disabled after authentication.
- UsePAM
-
Enables the Pluggable Authentication Module interface.
If set to
``yes''
this will enable PAM authentication using
ChallengeResponseAuthentication
and
PasswordAuthentication
in addition to PAM account and session module processing for all
authentication types.
Because PAM challenge-response authentication usually serves an equivalent
role to password authentication, you should disable either
PasswordAuthentication
or
ChallengeResponseAuthentication.
If
UsePAM
is enabled, you will not be able to run
sshd(8)
as a non-root user.
The default is
``no''
- UsePrivilegeSeparation
-
Specifies whether
sshd(8)
separates privileges by creating an unprivileged child process
to deal with incoming network traffic.
After successful authentication, another process will be created that has
the privilege of the authenticated user.
The goal of privilege separation is to prevent privilege
escalation by containing any corruption within the unprivileged processes.
The default is
``yes''
If
UsePrivilegeSeparation
is set to
``sandbox''
then the pre-authentication unprivileged process is subject to additional
restrictions.
- VersionAddendum
-
Optionally specifies additional text to append to the SSH protocol banner
sent by the server upon connection.
The default is
``none''
- X11DisplayOffset
-
Specifies the first display number available for
sshd(8)Ns's
X11 forwarding.
This prevents sshd from interfering with real X11 servers.
The default is 10.
- X11Forwarding
-
Specifies whether X11 forwarding is permitted.
The argument must be
``yes''
or
``no''
The default is
``no''
When X11 forwarding is enabled, there may be additional exposure to
the server and to client displays if the
sshd(8)
proxy display is configured to listen on the wildcard address (see
X11UseLocalhost
below), though this is not the default.
Additionally, the authentication spoofing and authentication data
verification and substitution occur on the client side.
The security risk of using X11 forwarding is that the client's X11
display server may be exposed to attack when the SSH client requests
forwarding (see the warnings for
ForwardX11
in
ssh_config5).
A system administrator may have a stance in which they want to
protect clients that may expose themselves to attack by unwittingly
requesting X11 forwarding, which can warrant a
``no''
setting.
Note that disabling X11 forwarding does not prevent users from
forwarding X11 traffic, as users can always install their own forwarders.
X11 forwarding is automatically disabled if
UseLogin
is enabled.
- X11UseLocalhost
-
Specifies whether
sshd(8)
should bind the X11 forwarding server to the loopback address or to
the wildcard address.
By default,
sshd binds the forwarding server to the loopback address and sets the
hostname part of the
DISPLAY
environment variable to
``localhost''
This prevents remote hosts from connecting to the proxy display.
However, some older X11 clients may not function with this
configuration.
X11UseLocalhost
may be set to
``no''
to specify that the forwarding server should be bound to the wildcard
address.
The argument must be
``yes''
or
``no''
The default is
``yes''
- XAuthLocation
-
Specifies the full pathname of the
xauth(1)
program.
The default is
/usr/bin/xauth
(8)
command-line arguments and configuration file options that specify time
may be expressed using a sequence of the form:
Each member of the sequence is added together to calculate
the total time value.
OpenSSH is a derivative of the original and free
ssh 1.2.12 release by Tatu Ylonen.
Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos,
Theo de Raadt and Dug Song
removed many bugs, re-added newer features and
created OpenSSH.
Markus Friedl contributed the support for SSH
protocol versions 1.5 and 2.0.
Niels Provos and Markus Friedl contributed support
for privilege separation.